완료 | 휴대용 오실로스코프
페이지 정보
작성자 못나니 쪽지보내기 메일보내기 자기소개 아이디로 검색 전체게시물 (203.♡.56.242) 작성11-09-08 16:54 수정11-09-08 17:49 조회44,745회 댓글1건첨부파일
- ET310A.rar (357.9K) 1회 다운로드 DATE : 2011-09-08 16:54:53
본문
처분 하려고 합니다, 구입한지 1주 됩니다, 르바란때 가져왔음 사용도 별로 하지 않았습니다,
스펙은 아래 참조 하시면 됩니다, 중국산이라서 정밀도는 별로 기대 하지
않는게 좋을거 같습니다, 테스터기 겸용이라서 직/교류 전압 전류 저항
콘덴셔 헬쯔 등 잡다한 기능들이 무지 많이 들어있습니다, 옵션으로
온도센서 도 구입 하였습니다, PC 연결 케이블및 프로그램은 재구입 해야
하는 관계로 구입 않했습니다, 박스는 없고 가방 및 본체 충전어댑터 및 온도 센서
확장 패키지 있습니다, 가격은 150만 루피아 예상하고있습니다,
필요하신분 쪽지 주세요
Features:
• Combination of a 4000 count auto-range True RMS DMM and
a handheld Digital Storage Oscilloscope at the size and the cost of a multimeter
• DMM functions include True RMS AC/DC voltage and current, resistance,
capacitance, frequency, duty cycle, dBm, diode and continuity tests
• Full auto set up for volt/div and time/div of DSO
• DSO Trigger mode: Auto/normal/single
• DSO Auto measure: Vpp, Vavg, Vrms, dBm
• DSO Cursor readout: dV, dt, 1/dt (frequency)
• Screen hold function
• Save and recall up to 100 waveform and data
• High contrast FSTN LCD with white LED backlight
General Specifications
Display | 128 ´ 128 pixel graphic LCD | Viewing Area | 71.7 mm x 71.7mm |
Back Light | White LED, 3 levels of brightness | Input Impedance | 10MΩ |
Power | Inner Polymer Li-Ion Battery or AC adapter | Auto Power Off | 5~60minutes adjustable with disable feature |
Indication of low power | Charging time | About 3hrs | |
Battery life | 12~16hrs approx. (vary with different models) | Memory | 100 records (both DMM data and DSO waveform)* |
Operational conditions | 0°C to +50°C (+32°F to +122°F); < 75%RH | Storage conditions | -10°C to +60°C (-14°F to 140°F) |
Dimensions | 86 mm ´ 186 mm ´ 32mm | Weight | 325g ( without the holster and other accessories) |
* The ET310A has only 50 records.
• Auto power off in 5~60min or continuous on
• Inner Polymer Li-Ion Battery with AC adapter
• Isolated USB/RS232 interface with PC
Digital Storage Oscilloscope
Simulation bandwidth | D DC ~ 10MHz(50mV/div ~ 10V/div) | Maximum real-time sampling rate | 50Msps |
The vertical resolution | 8 bits | Nonlinearity | ±1 bit |
Channel number | 1 | Coupling | DC/AC/GND |
Input impedance | about 10MΩ | indexing | Vertical ± 4.8, horizontal 12.8 |
Vertical sensitivity range | 50mV/div ~ 200V/div | When range | 0.20µs/div ~ 20s/div |
Vertical amplitude precision | ±(5%+ 0.1div) | When accuracy | ±(0.01% + 0.1div) |
Automatic zero reference | In DC/dB measurement | Scanning mode | Auto/normal/single |
Trigger level | ± 12 div (At each step, 0.1div) | Trigger slope | Rising along/down along |
Trigger position adjustment | ± 6 div (At each step, 0.1div) | Automatic Settings | When the vertical amplitude and automatic Settings |
The cursor measurement function | dV, dt, 1/dt (Frequency) | Automatic measurement function | Vp-p, Vavg, RMS, dBm |
Automatic measurement accuracy | ±(5%+ 0.1div) | Record length | 12.8div |
* 10MHz refers to simulate bandwidth to 3db voltage when the attenuation of bandwidth, when the input signal interference,
change with ADP08 and special high frequency shield.
* 1-2-5 for vertical attenuation switch range
Digital Multimeter
Function | Range | Resolution | Accuracy |
DC Voltage | 400.0mV | 0.1mV | ±(0.75%rdg + 10dgt) |
4.000V | 1mV | ||
40.00V | 10mV | ||
400.0V | 100mV | ||
1000V | 1V | ± (1.5%rdg + 10dgt) | |
AC Voltage (True RMS) | 400.0mV | 0.1mV | 50Hz~1kHz: ±(1.0%rdg + 10dgt); 1kHz~10kHz: ±(2.0%rdg + 10dgt); 10kHz~50kHz: ±(3.0%rdg + 10dgt); (above 50kHz not specified) |
4.000V | 1mV | ||
40.00V | 10mV | ||
400.0V | 100mV | ||
750V | 1V | 50Hz~1kHz : ± (1.5%rdg + 10dgt) | |
DC Current | 40.00/400.0mA | 10/100µA | ±(1.2%rdg + 10dgt) |
4.000/20.00A | 1/10mA | ||
AC Current (True RMS) | 40.00/400.0mA | 10/100µA | ±(1.5%rdg + 10dgt) 50Hz~1kHz (above 1kHz not specified) |
4.000/20.00A | 1/10mA | ||
Resistance | 400.0W | 0.1 Ω | ±(1.0%rdg + 5dgt) |
4.000K | 1 Ω | ||
40.00K | 10 Ω | ||
400.0K | 100 Ω | ||
4.000MW | 1K | ||
40.00MW | 10K | ± (3.0%rdg + 5dgt) | |
Capacitance | 51.20nF | 1pF | ± (2%rdg + 10dgt) |
512.0nF | 10pF | ± (1%rdg + 3dgt) | |
5.120μF | 100pF | ± (1%rdg + 3dgt) | |
51.20μF | 1nF | ± (1.5%rdg + 3dgt) | |
100.0μF | 10nF | May need 30 sec. | |
Frequency Counter | 5.12Hz ~ 5.12MHz | 0.1Hz ~ 1kHz | ± (1.0%rdg + 5dgt), (The signal amplitude ³ 3Vp-p, AC V or 20mA RMS, AC A) |
Duty Cycle | 0.1~99.9% | ||
Diode | Open circuit voltage 1.5 V, maximum current about 1.5mA | ||
Continuity | Sound when lower than 30Ω | ||
Auto range | For every function | ||
Over range | Indicates “O. L” (Over load) | ||
Measurement rate | 2.5 times/sec. | ||
Dynamic Data Window | Keep the data in the window live In hold mode. | ||
dB (-80 ~ +80dB) reference | 2, 3, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, 1200 Ω | ||
Fuse | φ5×20,0.5A/250V |
추천 0